ProcedureGantry — Covers & accessRemove/Mount
Remove, remount or withdraw the upper cover
Remove and remount the gantry's upper cover with a two-worker lift, or withdraw it straight upward alone on its sliding hook bracket when only one worker is available.
Applies to
Aquilion 16 (TSX-101A)
Personnel
2 technicians · Basic-to-intermediate — hand-tool screw removal (screw count and side given; source does not name a driver/wrench type or torque value) plus careful lifting to keep the cover clear of the front cover, and for the one-worker method, working one side fully before the other on the sliding hook bracket (skill assessment derived from procedure content — not an OEM-stated skill level).
Steps
10 steps
Source
2D201-061E*H p.58-59
Tools & parts
| Item | Part number | Qty |
|---|---|---|
| Upper cover side screws (both methods) | n/a in source | 4 total — 2 on the right side, 2 on the left side |
| Sliding hook bracket securing screw (one-worker method only) | n/a in source | 1 screw per side |
Full step-by-step for Remove, remount or withdraw the upper cover
All 10 steps are documented in the FSELIB Aquilion 16 (TSX-101A) service manual — re-authored, web-first, with the real figures from the source.
Open the full procedureRelated Gantry — Covers & access guides
Adjust the operating panel acrylic cover clearance4 stepsClean the FRP covers and remove the wedge/slit optical system7 stepsOpen and close the gantry front cover10 stepsRemove and remount the base and under covers13 stepsRemove and mount the dome cover5 stepsRemove and mount the Mylar sheet (ring)5 steps
View all Aquilion 16 (TSX-101A) guidesSource: 2D201-061E*H p.58-59. Preview re-authored by FSELIB — the full procedure with figures and steps is in the paid service manual.