Information / dialogReconstruction

00000006 — AutoImageTransfer error / reconstruction sequence error

Canon Medical (Toshiba) CT error code, reported by the Reconstruction / AutoImageTransfer.

What 00000006 means

On Aquilion RX / V4-62R004 and V3.20R003 and Aquilion ONE / V4.2 and Aquilion S16 and Asteion Super4 and Aquilion 16 CT systems, status code 00000006 indicates: AutoImageTransfer error / reconstruction sequence error. The code originates in the Reconstruction section of the Reconstruction / AutoImageTransfer. Severity level 1 (Information / dialog).

Reported action: Check the AutoImageTransfer queue for the affected exam, confirm whether the images actually reached the destination and resend them if not. If the reconstruction-sequence message is the one shown instead, review the reconstruction log for that exam and call service if it repeats..

Listed under the 20:Device PIP and 80:Device APPL tables for Aquilion 16, Aquilion RX/V4-62R004, Aquilion ONE/V4.2, Aquilion S16, Asteion Super4 and V3.20R003, with the OEM message "Error in AutoImageTransfer." On Aquilion RX/V4-62R004, Aquilion ONE/V4.2 and V3.20R003 only, the same code value also carries the message "An error occurred in the reconstruction sequence."

Full troubleshooting for 00000006

The complete diagnosis, cause tree, and step-by-step remedy for the Reconstruction subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related Reconstruction codes

00000001RECON unit ended abnormally, reconstruction queue full00000002RECON unit timed out — restart the reconstruction queue00000003RECON unit failed to start — delete the reconstruction queue00000005RECON unit error — incorrect parameter set / Stack Scan aborted00000007Images skipped during EGR / AutoImageTransfer error00000008Reconstruction request deleted — raw data outside available area00000009Helical Scan aborted / images skipped during RGR0000002CAbnormal ECG data found in a reconstruction request

Related service procedures

Run the console malfunction-diagnosis program (hwtest)Console (Diagnostics)Run the independent MHR PWB test (diagnostics) from the RTM terminalConsole (Diagnostics)Remove the host PC unit (PX74-07959 GR-1/GR-2)Console (Operation)Remove the host PC unit (PX74-08766 GR-1/GR-2)Console (Operation)Remove and install an RDD disk/power-supply unit (Rorke Data)Console (Recon)Remove and install an RDD fan unit (Rorke Data)Console (Recon)
Discuss 00000006 with other field engineers in the FSELIB forum

Source: errmsg.eng — 20:Device PIP / 80:Device APPL tables. Reference information re-authored by FSELIB — not a copy of the OEM manual.