ProcedureGantry — Covers & accessAdjust

Adjust the operating panel acrylic cover clearance

Restore the required clearance between the operating panel's switch key tops and its acrylic cover after the cover or its PWB has been replaced, so the keys return fully after every press.

Applies to
Aquilion 16 (TSX-101A) — Gantry Mechanism volume, source 2D201-061, section 8.6 (Procedure for Adjusting the Operating Panel Acrylic Cover)
Personnel
1 technician · Basic — loosening/retightening the acrylic-cover fixing screws and reading a clearance (thickness) gauge against a single 0.5 mm minimum standard; no electrical measurement or component replacement is described for this section (skill assessment derived from procedure content — not an OEM-stated skill level)
Steps
4 steps
Source
2D201-061E*H p.114

Tools & parts

ItemPart numberQty
Standard toolsn/a in source1 set
Clearance gauge (thickness gauge)n/a in source1

Full step-by-step for Adjust the operating panel acrylic cover clearance

All 4 steps are documented in the FSELIB Aquilion 16 (TSX-101A) service manual — re-authored, web-first, with the real figures from the source.

Open the full procedure

Related Gantry — Covers & access guides

Clean the FRP covers and remove the wedge/slit optical system7 stepsOpen and close the gantry front cover10 stepsRemove and remount the base and under covers13 stepsRemove and mount the dome cover5 stepsRemove and mount the Mylar sheet (ring)5 stepsRemove and remount the side cover4 steps
View all Aquilion 16 (TSX-101A) guides

Related error codes

00000001RECON unit ended abnormally, reconstruction queue full00000002RECON unit timed out — restart the reconstruction queue00000003RECON unit failed to start — delete the reconstruction queue00000004Helical scan aborted, reconstruction request not accepted00000005RECON unit error — incorrect parameter set / Stack Scan aborted00000006AutoImageTransfer error / reconstruction sequence error

Source: 2D201-061E*H p.114. Preview re-authored by FSELIB — the full procedure with figures and steps is in the paid service manual.