ProcedureGantry — Covers & accessRemove/Mount
Remove and remount the side cover
Remove and remount the gantry's side cover to reach whatever is behind it, using the screw-and-tab method described in source.
Applies to
Aquilion 16 (TSX-101A)
Personnel
1 technician · Basic — removing four screws and lifting/engaging a cover by hand; no tool beyond a screwdriver (type not specified in source) and no electrical/mechanical adjustment are called out
Steps
4 steps
Source
2D201-061E*H p.55
Tools & parts
| Item | Part number | Qty |
|---|---|---|
| Screwdriver (type not specified in source) | n/a in source |
Full step-by-step for Remove and remount the side cover
All 4 steps are documented in the FSELIB Aquilion 16 (TSX-101A) service manual — re-authored, web-first, with the real figures from the source.
Open the full procedureRelated Gantry — Covers & access guides
Adjust the operating panel acrylic cover clearance4 stepsClean the FRP covers and remove the wedge/slit optical system7 stepsOpen and close the gantry front cover10 stepsRemove and remount the base and under covers13 stepsRemove and mount the dome cover5 stepsRemove and mount the Mylar sheet (ring)5 steps
View all Aquilion 16 (TSX-101A) guidesSource: 2D201-061E*H p.55. Preview re-authored by FSELIB — the full procedure with figures and steps is in the paid service manual.