TroubleshootingX-ray & HV (XC control)TroubleshootingTroubleshoot
Troubleshoot XC operation, cable interlock and starter communication faults
Work the Aquilion 16's three XC control-side faults — **XC operation error**, **cable interlock**, and **starter communication error** — using the OEM's own three decision-tree flowcharts (source §8.2.8-8.2.10, p.85-87).
Applies to
Aquilion 16 (TSX-101A) — X-ray & HV volume, source 2D201-064, sections 8.2.8 (XC operation error, p.85), 8.2.9 (Cable interlock, p.86) and 8.2.10 (Starter communication error, p.87)
Personnel
1 technician · Intermediate — reading the XC's own error log and discharge/rotor-current indications, checking the mA detection cable (S72) connection, checking starter output/control wiring and fuses F1-F3 in the power unit, and reading/replacing the XC ROM at the version this tree calls for — escalating to replacing the mA detection cable, the SRU-L, the SRU power unit, or the XC itself when a check does not clear the fault (skill assessment derived from procedure content — not an OEM-stated skill level)
Steps
0 steps
Source
2D201-064E*H p.85-87
Full step-by-step for Troubleshoot XC operation, cable interlock and starter communication faults
All 0 steps are documented in the FSELIB Aquilion 16 (TSX-101A) service manual — re-authored, web-first, with the real figures from the source.
Open the full procedureRelated X-ray & HV (XC control) guides
If (filament current) adjustment procedure11 stepsXC Maintenance Program: outline, connection and menu1 stepsXC Maintenance Program: Signal Show (kV/mA/If/HV waveforms)1 stepsXC Maintenance Program: block test, exposure/running test, debug monitor and screens9 stepsSet up PWBs and adjust the kV waveform (VR3)4 stepsReplace the XC PWB backup battery4 steps
View all Aquilion 16 (TSX-101A) guidesSource: 2D201-064E*H p.85-87. Preview re-authored by FSELIB — the full procedure with figures and steps is in the paid service manual.