InstallationInstallationInstall
Pre-delivery: mount couch accessories, clean and fill the QC sheet
Mount the couch-top-end fastener and the patient fasteners onto the patient couch, wipe down the unit covers and panels, then close out the installation by recording the workstation's serial number and confirming every item on the installation quality check sheet is filled in.
Applies to
Aquilion 16 (TSX-101A) — Installation manual, source 2C201-160, Section 27 ("Preparations and Checks Before Delivery"), subsections 27.1 through 27.3 (p.162-165)
Personnel
Basic — the section is entirely hand-fitted accessory mounting (couch-top-end fastener, patient fasteners), a single-line wipe-down of covers and panels, and an administrative sign-off (reading a serial-number label or a console command, then confirming a checklist is complete). No electrical test, torque spec, or calibration step appears anywhere in this section. (Skill assessment derived from procedure content — not an OEM-stated skill level.)
Steps
10 steps
Source
2C201-160E*F p.162-165
Tools & parts
| Item | Part number | Qty |
|---|---|---|
| Couch-top-end fastener | n/a in source | n/a in source (qty not stated) |
| Patient fastener — 100 mm / 200 mm / 300 mm width | n/a in source | n/a in source (qty not stated) |
| Sheet of paper | n/a in source | n/a in source (qty not stated) |
| Workstation rear-panel serial-number label (or the "sysinfo" command) | n/a in source | n/a in source |
| Installation quality check sheet | n/a in source | 1 |
Full step-by-step for Pre-delivery: mount couch accessories, clean and fill the QC sheet
All 10 steps are documented in the FSELIB Aquilion 16 (TSX-101A) service manual — re-authored, web-first, with the real figures from the source.
Open the full procedureRelated Installation guides
Bring the patient couch and console into position9 stepsChecks before turning on the power7 stepsBasic disassembly and carrying-out of the system13 stepsFinal gantry-couch relationship check, system test and calibration data14 stepsIntegrated test — scan operation and image quality6 stepsRun the console malfunction-diagnosis program (hwtest)0 steps
View all Aquilion 16 (TSX-101A) guidesSource: 2C201-160E*F p.162-165. Preview re-authored by FSELIB — the full procedure with figures and steps is in the paid service manual.