ProcedureCouch/ControlAdjust
Set couch-top sliding fine-adjustment function
Turn the Aquilion 16 patient couch's top-sliding "fine adjustment" function ON or OFF by walking a HyperTerminal session through the KGTSM boot console's `adj` menu — the KGTSM keeps whatever value you set until it is changed again.
Applies to
Aquilion 16 (TSX-101A) — gantry/couch control volume 2D201-063, section 8.4, immediately following the couch horizontal movement absolute-value control data procedure (source subsection 8.3)
Personnel
1 technician · Basic — the whole job is a short HyperTerminal session against the KGTSM boot console: connecting a service cable to CN404, navigating the `adj` command, and entering `1` or `2` to pick OFF or ON. No electrical measurement, cover removal, or mechanical adjustment is described in this section (skill assessment derived from procedure content — not an OEM-stated skill level).
Steps
5 steps
Source
2D201-063E*G p.160
Tools & parts
| Item | Part number | Qty |
|---|---|---|
| PC | n/a in source | |
| Service cable (GR-1) | GR-1 (standard accessory) | |
| Terminal program (e.g. Hyper Terminal) | n/a in source |
Full step-by-step for Set couch-top sliding fine-adjustment function
All 5 steps are documented in the FSELIB Aquilion 16 (TSX-101A) service manual — re-authored, web-first, with the real figures from the source.
Open the full procedureRelated Couch/Control guides
Set couch autoslide movement range and zero-clear time4 stepsPatient couch control troubleshooting (CBTB-016A/016B)11 stepsAdjust couch height and projector angle displays10 stepsSet couch horizontal movement absolute-value control data9 stepsCouch slide servo amplifier operation and maintenance tool (CBTB-016A/016B)10 stepsCheck the couch-top speed2 steps
View all Aquilion 16 (TSX-101A) guidesSource: 2D201-063E*G p.160. Preview re-authored by FSELIB — the full procedure with figures and steps is in the paid service manual.