Information / dialogLAMS device

BB00A000 — Error in LMPP (LAMS device)

Canon Medical (Toshiba) CT error code, reported by the LAMS device.

What BB00A000 means

On Aquilion RX / V4-62R004 and V3.20R003 and Aquilion ONE / V4.2 CT systems, status code BB00A000 indicates: Error in LMPP (LAMS device). The code originates in the LAMS device section of the LAMS device. Severity level A0 (Information / dialog).

Reported action: Check the LMPP unit's supply voltage and its connections within the LAMS assembly, re-seat the connectors, then restart the system and repeat the operation that produced the code. Note whether LMPP fails on every attempt or only intermittently and whether LMHC or the Marker Controller also report — a single failing unit points at LMPP itself, several at the shared supply or wiring. Follow the LAMS troubleshooting flow in the service manual if it persists..

Toshiba/Canon Aquilion RX (V4-62R004), V3.20R003 and Aquilion ONE (V4.2) CT systems. The code is raised by the LAMS device and reports a fault in LMPP, one of the units the LAMS device supervises.

Full troubleshooting for BB00A000

The complete diagnosis, cause tree, and step-by-step remedy for the LAMS device subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related LAMS device codes

BB008000Error in LMHC (LAMS device)BB009000Error in Marker Controller (LAMS device)00000001RECON unit ended abnormally, reconstruction queue full00000002RECON unit timed out — restart the reconstruction queue00000003RECON unit failed to start — delete the reconstruction queue00000004Helical scan aborted, reconstruction request not accepted00000005RECON unit error — incorrect parameter set / Stack Scan aborted00000006AutoImageTransfer error / reconstruction sequence error

Related service procedures

Run the console malfunction-diagnosis program (hwtest)Console (Diagnostics)Run the independent MHR PWB test (diagnostics) from the RTM terminalConsole (Diagnostics)Remove the host PC unit (PX74-07959 GR-1/GR-2)Console (Operation)Remove the host PC unit (PX74-08766 GR-1/GR-2)Console (Operation)Remove and install an RDD disk/power-supply unit (Rorke Data)Console (Recon)Remove and install an RDD fan unit (Rorke Data)Console (Recon)
Discuss BB00A000 with other field engineers in the FSELIB forum

Source: Toshiba/Canon CT service error message table (errmsg.eng). Reference information re-authored by FSELIB — not a copy of the OEM manual.