Information / dialogFSYS / RSYS (exam database)

000001D2 — Exceeded the maximum images or raw data sets allowed in one exam

Canon Medical (Toshiba) CT error code, reported by the FSYS / RSYS (exam database).

What 000001D2 means

On Aquilion RX / V4-62R004 and V3.20R003 and Aquilion ONE / V4.2 and Aquilion S16 and Asteion Super4 and Aquilion 16 CT systems, status code 000001D2 indicates: Exceeded the maximum images or raw data sets allowed in one exam. The code originates in the FSYS / RSYS (exam database) section of the FSYS / RSYS (exam database). Severity level 1 (Information / dialog).

Reported action: The current exam has hit the system limit for images (FSYS) or raw data sets (RSYS) that a single exam can hold. Close the exam and start a new one to continue scanning; if this happens routinely, review the protocol's image and raw-data output against the per-exam limit..

Toshiba/Canon CT consoles on Aquilion RX/V4-62R004, V3.20R003, Aquilion ONE/V4.2, Aquilion S16, Asteion Super4 and Aquilion 16. The OEM text reads "Exceeded max. images in an exam." in the FSYS table on all six platform columns, and "Exceeded max. raws in an exam." in the RSYS table on Aquilion RX/V4-62R004, V3.20R003 and Aquilion ONE/V4.2.

Full troubleshooting for 000001D2

The complete diagnosis, cause tree, and step-by-step remedy for the FSYS / RSYS (exam database) subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related FSYS / RSYS (exam database) codes

000001F7Exceeded the maximum number of exams the database can hold000001F8Database full — image or raw data storage00000001RECON unit ended abnormally, reconstruction queue full00000002RECON unit timed out — restart the reconstruction queue00000003RECON unit failed to start — delete the reconstruction queue00000004Helical scan aborted, reconstruction request not accepted00000005RECON unit error — incorrect parameter set / Stack Scan aborted00000006AutoImageTransfer error / reconstruction sequence error

Related service procedures

Run the console malfunction-diagnosis program (hwtest)Console (Diagnostics)Run the independent MHR PWB test (diagnostics) from the RTM terminalConsole (Diagnostics)Remove the host PC unit (PX74-07959 GR-1/GR-2)Console (Operation)Remove the host PC unit (PX74-08766 GR-1/GR-2)Console (Operation)Remove and install an RDD disk/power-supply unit (Rorke Data)Console (Recon)Remove and install an RDD fan unit (Rorke Data)Console (Recon)
Discuss 000001D2 with other field engineers in the FSELIB forum

Source: errmsg.eng — 60:Device FSYS / 70:Device RSYS tables. Reference information re-authored by FSELIB — not a copy of the OEM manual.