Alarm — high severityRTM RDD — raw data disk array

C0030003 — Raw-data disk fault on the CT recon disk array (RDD)

Canon Medical (Toshiba) CT error code, reported by the RTM RDD (raw data disk array).

What C0030003 means

On Aquilion RX / V4-62R004 and V3.20R003 and Aquilion ONE / V4.2 and Aquilion S16 and Asteion Super4 and Aquilion 16 CT systems, status code C0030003 indicates: Raw-data disk fault on the CT recon disk array (RDD). The code originates in the RTM RDD — raw data disk array section of the RTM RDD (raw data disk array). Severity level A1 (Alarm — high severity).

Reported action: Stop scanning and check the RDD status LEDs (power, fan, HDD) on the console's disk array. Note the exam that produced the alarm and escalate to your service representative: a fault in the raw data disk array puts the raw data used for reconstruction at risk, and recovery means replacing the affected disk carrier and reconfiguring the array with parity..

Reported on Aquilion 16, Aquilion RX/V4-62R004, Aquilion ONE/V4.2, Aquilion S16, Asteion Super4 and V3.20R003. It comes from the 102:Device RTM RDD group of the console error table, where the OEM text reads "Error in RDD.", graded A1 (high-severity alarm). RDD is the Raw Data Disk Array that holds the scan raw data used for reconstruction; on the Aquilion 16 console it is the fibre-channel disk array mounted in the REC BOX.

Full troubleshooting for C0030003

The complete diagnosis, cause tree, and step-by-step remedy for the RTM RDD — raw data disk array subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related RTM RDD — raw data disk array codes

C0030001Raw data disk array (RDD) error on the CT consoleC0030002"Error in RDD" — disk array fault on the CT console00000001RECON unit ended abnormally, reconstruction queue full00000002RECON unit timed out — restart the reconstruction queue00000003RECON unit failed to start — delete the reconstruction queue00000004Helical scan aborted, reconstruction request not accepted00000005RECON unit error — incorrect parameter set / Stack Scan aborted00000006AutoImageTransfer error / reconstruction sequence error

Related service procedures

Run the console malfunction-diagnosis program (hwtest)Console (Diagnostics)Run the independent MHR PWB test (diagnostics) from the RTM terminalConsole (Diagnostics)Remove the host PC unit (PX74-07959 GR-1/GR-2)Console (Operation)Remove the host PC unit (PX74-08766 GR-1/GR-2)Console (Operation)Remove and install an RDD disk/power-supply unit (Rorke Data)Console (Recon)Remove and install an RDD fan unit (Rorke Data)Console (Recon)
Discuss C0030003 with other field engineers in the FSELIB forum

Source: errmsg.eng — 102:Device RTM RDD table. Reference information re-authored by FSELIB — not a copy of the OEM manual.