B8F20000 — Respiratory-gating signal abnormal — respiratory sync signal error (5103)

What B8F20000 means

On Aquilion RX / V4-62R004 and V3.20R003 and Aquilion ONE / V4.2 and Aquilion S16 and Asteion Super4 and Aquilion 16 CT systems, status code B8F20000 indicates: Respiratory-gating signal abnormal — respiratory sync signal error (5103). The code originates in the SYNC — respiratory gating section of the SYNC device — respiratory gating. Severity level A1 (Information / dialog).

Reported action: Check the respiratory gating system and the connection: sensor/belt position and tension, the sensor cable and its connector at the SYNC interface, and whether the monitor shows a usable respiratory waveform with the patient breathing normally. Restart the gating setup and repeat the acquisition; if a clean waveform is present and the code still appears, the fault is on the SYNC side — follow the SYNC device checks in the service manual and call service..

Toshiba/Canon Aquilion RX (V4-62R004), V3.20R003, Aquilion ONE (V4.2), Aquilion S16, Asteion Super4 and Aquilion 16 CT systems, on the SYNC device that handles the respiratory-gating signal. The service table pairs this code with detail 5103, a respiratory sync signal error with the gating signal abnormal before the confirm button is pressed. Its counterpart B8320000 (detail 5102) carries the same short message text.

Related SYNC — respiratory gating codes

Related service procedures