Information / dialogKeyboard (Nabipad)

B4110000 — Communication error between the keyboard (Nabipad) and the SS

Canon Medical (Toshiba) CT error code, reported by the Nabipad (keyboard).

What B4110000 means

On Aquilion RX / V4-62R004 and V3.20R003 and Aquilion ONE / V4.2 and Aquilion S16 and Asteion Super4 and Aquilion 16 CT systems, status code B4110000 indicates: Communication error between the keyboard (Nabipad) and the SS. The code originates in the Keyboard (Nabipad) section of the Nabipad (keyboard). Severity level 1 (Information / dialog).

Reported action: This one points at the path, not at the keys: inspect the keyboard cable and reseat the connector at both ends, keep it clear of moving parts and power cables, then power-cycle and test. If communication between the keyboard and the SS keeps dropping, the cable and the Nabipad interface are what service should examine first..

Reported on Aquilion 16, Aquilion RX/V4-62R004, Aquilion ONE/V4.2, Aquilion S16, Asteion Super4 and V3.20R003. It comes from the 6:Device Nabipad table, where the OEM text reads "Error in communication between KeyBoard and SS."

Full troubleshooting for B4110000

The complete diagnosis, cause tree, and step-by-step remedy for the Keyboard (Nabipad) subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related Keyboard (Nabipad) codes

B4100000Keyboard error reported by the Nabipad device00000001RECON unit ended abnormally, reconstruction queue full00000002RECON unit timed out — restart the reconstruction queue00000003RECON unit failed to start — delete the reconstruction queue00000004Helical scan aborted, reconstruction request not accepted00000005RECON unit error — incorrect parameter set / Stack Scan aborted00000006AutoImageTransfer error / reconstruction sequence error00000007Images skipped during EGR / AutoImageTransfer error

Related service procedures

Run the console malfunction-diagnosis program (hwtest)Console (Diagnostics)Run the independent MHR PWB test (diagnostics) from the RTM terminalConsole (Diagnostics)Remove the host PC unit (PX74-07959 GR-1/GR-2)Console (Operation)Remove the host PC unit (PX74-08766 GR-1/GR-2)Console (Operation)Remove and install an RDD disk/power-supply unit (Rorke Data)Console (Recon)Remove and install an RDD fan unit (Rorke Data)Console (Recon)
Discuss B4110000 with other field engineers in the FSELIB forum

Source: errmsg.eng — 6:Device Nabipad table. Reference information re-authored by FSELIB — not a copy of the OEM manual.