Information / dialogECG gating

0000000F — Abnormal ECG data found

Canon Medical (Toshiba) CT error code, reported by the APPL (application software).

What 0000000F means

On Aquilion RX / V4-62R004 and V3.20R003 and Aquilion ONE / V4.2 CT systems, status code 0000000F indicates: Abnormal ECG data found. The code originates in the ECG gating section of the APPL (application software). Severity level 0 (Information / dialog).

Reported action: The system found abnormal ECG data — the ECG trace that ECG-gated scanning and reconstruction rely on is not usable as recorded. Check the ECG electrodes, cable and signal quality on the patient and repeat the acquisition; if the recorded ECG cannot be used, process the study without ECG gating..

Listed only in the 80:Device APPL table, for Aquilion RX/V4-62R004, V3.20R003 and Aquilion ONE/V4.2. The OEM text is "Abnormal ECG data was found."

Full troubleshooting for 0000000F

The complete diagnosis, cause tree, and step-by-step remedy for the ECG gating subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related ECG gating codes

00000001RECON unit ended abnormally, reconstruction queue full00000002RECON unit timed out — restart the reconstruction queue00000003RECON unit failed to start — delete the reconstruction queue00000004Helical scan aborted, reconstruction request not accepted00000005RECON unit error — incorrect parameter set / Stack Scan aborted00000006AutoImageTransfer error / reconstruction sequence error00000007Images skipped during EGR / AutoImageTransfer error00000008Reconstruction request deleted — raw data outside available area

Related service procedures

Run the console malfunction-diagnosis program (hwtest)Console (Diagnostics)Run the independent MHR PWB test (diagnostics) from the RTM terminalConsole (Diagnostics)Remove the host PC unit (PX74-07959 GR-1/GR-2)Console (Operation)Remove the host PC unit (PX74-08766 GR-1/GR-2)Console (Operation)Remove and install an RDD disk/power-supply unit (Rorke Data)Console (Recon)Remove and install an RDD fan unit (Rorke Data)Console (Recon)
Discuss 0000000F with other field engineers in the FSELIB forum

Source: errmsg.eng — 80:Device APPL table. Reference information re-authored by FSELIB — not a copy of the OEM manual.