Information / dialogReconstruction (RECON) unit

00000008 — Reconstruction request deleted — raw data outside available area

Canon Medical (Toshiba) CT error code, reported by the Reconstruction (RECON) unit.

What 00000008 means

On Aquilion RX / V4-62R004 and V3.20R003 and Aquilion ONE / V4.2 and Aquilion S16 and Asteion Super4 and Aquilion 16 CT systems, status code 00000008 indicates: Reconstruction request deleted — raw data outside available area. The code originates in the Reconstruction (RECON) unit section of the Reconstruction (RECON) unit. Severity level 1 (Information / dialog).

Reported action: Check the raw scan data flagged as inappropriate and confirm the requested reconstruction range is within the gantry's available scan area before resubmitting the reconstruction request..

Reported on Aquilion 16, Aquilion RX/V4-62R004, Aquilion ONE/V4.2, Aquilion S16, Asteion Super4 and V3.20R003 (the "Inappropriate raw data was found." text specifically on Aquilion RX/V4-62R004, V3.20R003 and Aquilion ONE/V4.2). This code number is shared across the 1:SS Display Message, 20:Device PIP and 80:Device APPL tables in errmsg.eng, whose OEM texts are "Gantry tilted.", "Inappropriate raw data was found." and "Deleted reconstruction request(outside available area)." — the raw-data and deleted-request messages are what matter for reconstruction; "Gantry tilted." is the routine status use of the same code number.

Full troubleshooting for 00000008

The complete diagnosis, cause tree, and step-by-step remedy for the Reconstruction (RECON) unit subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related Reconstruction (RECON) unit codes

00000001RECON unit ended abnormally, reconstruction queue full00000002RECON unit timed out — restart the reconstruction queue00000003RECON unit failed to start — delete the reconstruction queue00000005RECON unit error — incorrect parameter set / Stack Scan aborted00000006AutoImageTransfer error / reconstruction sequence error00000007Images skipped during EGR / AutoImageTransfer error00000009Helical Scan aborted / images skipped during RGR0000002CAbnormal ECG data found in a reconstruction request

Related service procedures

Run the console malfunction-diagnosis program (hwtest)Console (Diagnostics)Run the independent MHR PWB test (diagnostics) from the RTM terminalConsole (Diagnostics)Remove the host PC unit (PX74-07959 GR-1/GR-2)Console (Operation)Remove the host PC unit (PX74-08766 GR-1/GR-2)Console (Operation)Remove and install an RDD disk/power-supply unit (Rorke Data)Console (Recon)Remove and install an RDD fan unit (Rorke Data)Console (Recon)
Discuss 00000008 with other field engineers in the FSELIB forum

Source: errmsg.eng — 1:SS Display Message / 20:Device PIP / 80:Device APPL tables. Reference information re-authored by FSELIB — not a copy of the OEM manual.