InstallationGantryInstall
Install optional units and mount the covers
Install any optional units per their own manuals, then fit the gantry's base and side covers in a fixed nine-step order — leaving side cover L off if the gantry-couch relationship check still has to be run — before closing the CPU BOX and REC BOX back up.
Applies to
Aquilion 16 (TSX-101A) — Installation volume, source 2C201-160, Section 19 ("Installing Optional Units") and Section 20 ("Mounting the Covers"), subsections 20.1-20.2 (p.132-134)
Personnel
Basic — the section is mainly a fixed-order checklist (fit nine named gantry covers in sequence, then refit the CPU BOX/REC BOX covers) with no torque values, measurements, or adjustments called out; the one judgment call is whether to leave side cover L off pending a later check. (Skill assessment derived from procedure content — not an OEM-stated skill level.)
Steps
6 steps
Source
2C201-160E*F p.132-134
Tools & parts
| Item | Part number | Qty |
|---|---|---|
| B front cover R | n/a in source | 1 |
| B front cover L | n/a in source | 1 |
| Front under cover | n/a in source | 1 |
| B rear cover R | n/a in source | 1 |
| B rear cover L | n/a in source | 1 |
| Cable cover | n/a in source | 1 |
| Side cover L | n/a in source | 1 |
| Side cover R | n/a in source | 1 |
| Mylar sheet | n/a in source | 1 |
| Decorative cap | n/a in source | n/a in source (qty not stated) |
| CPU BOX side covers (×2) + connector panel cover *(enumeration derived from §7)* | n/a in source | n/a in source |
| REC BOX side covers (×2) + connector panel cover *(enumeration derived from §7)* | n/a in source | n/a in source |
Full step-by-step for Install optional units and mount the covers
All 6 steps are documented in the FSELIB Aquilion 16 (TSX-101A) service manual — re-authored, web-first, with the real figures from the source.
Open the full procedureRelated Gantry guides
Bring the gantry into the scanner room15 stepsAlign the slip-ring brush assemblies10 stepsClean the large-current slip ring (LCSR)21 stepsOperational checks of gantry, couch, detector and X-ray tube18 stepsClean dome internal-projector window and check Mylar ring mounting — 1.345 stepsGantry fan-noise check and filter cleaning — 1.44/1.456 steps
View all Aquilion 16 (TSX-101A) guidesSource: 2C201-160E*F p.132-134. Preview re-authored by FSELIB — the full procedure with figures and steps is in the paid service manual.