Information / dialogCOM-PRE — PRE / scan data transfer

B6610000 — PRE low-count error — fewer counts than expected (COM-PRE)

Canon Medical (Toshiba) CT error code, reported by the COM-PRE (PRE data link).

What B6610000 means

On Aquilion RX / V4-62R004 and V3.20R003 and Aquilion ONE / V4.2 and Aquilion S16 and Asteion Super4 and Aquilion 16 CT systems, status code B6610000 indicates: PRE low-count error — fewer counts than expected (COM-PRE). The code originates in the COM-PRE — PRE / scan data transfer section of the COM-PRE (PRE data link). Severity level 1 (Information / dialog).

Reported action: Look at the affected images for excess noise before accepting the study. Check whether the low-count message is tied to low-dose/low-mA protocols or shows up regardless of technique, and repeat the scan. If it keeps returning, the acquisition chain feeding the PRE is what service should inspect..

Reported on Aquilion 16, Aquilion RX/V4-62R004, Aquilion ONE/V4.2, Aquilion S16, Asteion Super4 and V3.20R003. It comes from the 8:Device COM-PRE table, where the OEM text reads "Error in PRE ( Low count )."

Full troubleshooting for B6610000

The complete diagnosis, cause tree, and step-by-step remedy for the COM-PRE — PRE / scan data transfer subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related COM-PRE — PRE / scan data transfer codes

B6200000SS error on the PRE (pre-processing) pathB6300000Error in PRE — pre-processing fault on the COM-PRE pathB6310000GCIF detected a wrong transmitted channel number (COM-PRE)B6320000GCIF detected a wrong transmitted projection-data number (COM-PRE)B6620000Offset-data overflow on the COM-PRE pathB6F10000Raw-data transmission error on the COM-PRE link00000001RECON unit ended abnormally, reconstruction queue full00000002RECON unit timed out — restart the reconstruction queue

Related service procedures

Run the console malfunction-diagnosis program (hwtest)Console (Diagnostics)Run the independent MHR PWB test (diagnostics) from the RTM terminalConsole (Diagnostics)Remove the host PC unit (PX74-07959 GR-1/GR-2)Console (Operation)Remove the host PC unit (PX74-08766 GR-1/GR-2)Console (Operation)Remove and install an RDD disk/power-supply unit (Rorke Data)Console (Recon)Remove and install an RDD fan unit (Rorke Data)Console (Recon)
Discuss B6610000 with other field engineers in the FSELIB forum

Source: errmsg.eng — 8:Device COM-PRE table. Reference information re-authored by FSELIB — not a copy of the OEM manual.