Preventive MaintenanceRecon/ConsolePreventive MaintenancePM
Console cleaning, fans, PC input and DC power-supply checks — 6.1-6.11
Work through the console's eleven periodic-inspection items in order — cleaning the monitor, air paths, and mouse; listening/looking for fan and functional faults; and measuring AC input and DC power-supply voltages against their printed criteria — closing out each one against the acceptance criterion stated for it.
Applies to
Aquilion 16 (TSX-101A) — periodic inspection items 6.1 through 6.11, the "6. Console" group of the periodic-inspection table, source volume 2Y201-061 (Check and Maintenance Procedures), subsection 5.6 "Console." This group immediately follows "5. Data transfer unit" (items 5.1-5.2) and immediately precedes "7. Entire system" (items 7.1-7.3, image-quality tests) in the same master schedule — see Related. The table's own column headers show four checking-period buckets, 3M / 6M / 1Y / 2Y, but the specific interval mark(s) for these eleven items were not preserved by the text extraction of the table — the same limitation already flagged elsewhere in this corpus (e.g. item 1.25). Confirm the checked period(s) against the printed table in source 2Y201-061E*E p.121-122 before scheduling. One item, 6.9, carries an explicit timing note in the source's own running text rather than a reconstructed interval mark — reproduced verbatim in Steps below.
Personnel
1 technician · Basic to intermediate. Most of this group is visual/hand cleaning (6.1-6.4, 6.6, 6.11) or a listen-and-look functional check (6.5, 6.9, 6.10); two items (6.7, 6.8) require measuring AC input voltage and six DC power-supply rails against printed criteria at named test points, with no instrument model given in source for either. (Skill assessment derived from procedure content — not an OEM-stated skill level.)
Steps
5 steps
Source
2Y201-061E*E p.121-122
Tools & parts
| Item | Part number | Qty |
|---|---|---|
| Cleaner | n/a in source | |
| Vacuum cleaner, with a nozzle attached | n/a in source | |
| Cotton rod | n/a in source | |
| RDD fan assembly (replacement part) | **BSX74-1773E** (FAN ASSEMBLY) |
Full step-by-step for Console cleaning, fans, PC input and DC power-supply checks — 6.1-6.11
All 5 steps are documented in the FSELIB Aquilion 16 (TSX-101A) service manual — re-authored, web-first, with the real figures from the source.
Open the full procedureRelated Recon/Console guides
Confirm console startup, check the audio system and set up the console software9 stepsPlace the couch and console and install the RDD HDDs9 stepsRun the console malfunction-diagnosis program (hwtest)0 stepsRun the independent MHR PWB test (diagnostics) from the RTM terminal4 stepsRemove the host PC unit (PX74-07959 GR-1/GR-2)4 stepsRemove the host PC unit (PX74-08766 GR-1/GR-2)5 steps
View all Aquilion 16 (TSX-101A) guidesSource: 2Y201-061E*E p.121-122. Preview re-authored by FSELIB — the full procedure with figures and steps is in the paid service manual.