InstallationRecon/ConsoleInstall

Place the couch and console and install the RDD HDDs

Place the patient couch in front of the gantry without anchoring it yet, position and cable the console — CPU BOX, REC BOX, monitors and keyboards — on its desk, and install the five RDD hard-disk-drive carriers into the RDD cabinet, completing the physical placement stage of Aquilion 16 installation before the couch is secured or the console is powered on.

Applies to

Aquilion 16 (TSX-101A) — Installation manual (source 2C201-160), Sections 6 ("Installing the Patient Couch") and 7 ("Installing the Console"); no couch-configuration-specific constraint (e.g., CBTB-014/016) is stated in this section

Personnel

1 technician · Basic-to-intermediate — desk assembly and CPU BOX/REC BOX/monitor/keyboard placement per a dimensioned floor plan, opening and removing side and connector-panel covers, installing five numbered disk-drive carriers into matching RDD cabinet slots, and connecting monitor (DVI), keyboard and transformer-limited monitor power cables; no electrical measurement, adjustment or software configuration is described in this section (skill assessment derived from procedure content — not an OEM-stated skill level).

Steps

9 steps

Source

2C201-160E*F p.60-66

Tools & parts

Item	Part number	Qty
CPU BOX side covers (x2) + connector panel cover	n/a in source	Mass of one cover: approx. 3 kg
REC BOX side covers (x2) + connector panel cover	n/a in source	Mass of one cover: approx. 3 kg
Disk drive unit, in carrier, for the RDD	n/a in source	5 units total
DVI conversion connector	n/a in source	Supplied with the system; quantity not stated
Navibox–Keyboard cable	n/a in source	Length 2.9 m; maximum length 6 m
Navibox–Monitor cable	n/a in source	Length 6 m
Keyboard–Mouse cable	n/a in source	Length 1.5 m

Safety

NOTICE

Hazard: Connecting the power cable of a unit/device other than the optional units to the transformer power connectors on the back of the CPU BOX

Consequence: Source labels this callout CAUTION; because the stated consequence is equipment malfunction — the internal fuse may blow, making it impossible to use the monitors, etc. — rather than personal injury, FSELIB classifies it as NOTICE per the equipment-damage mapping used across this platform. The connectors' total capacity is 100 V and 6.25 A.

Avoidance: Do not connect the power cable of any unit/device other than the optional units to these transformer power connectors.

Full step-by-step for Place the couch and console and install the RDD HDDs

All 9 steps are documented in the FSELIB Aquilion 16 (TSX-101A) service manual — re-authored, web-first, with the real figures from the source.

Open the full procedure

Related Recon/Console guides

Confirm console startup, check the audio system and set up the console software9 steps Console cleaning, fans, PC input and DC power-supply checks — 6.1-6.115 steps Run the console malfunction-diagnosis program (hwtest)0 steps Run the independent MHR PWB test (diagnostics) from the RTM terminal4 steps Remove the host PC unit (PX74-07959 GR-1/GR-2)4 steps Remove the host PC unit (PX74-08766 GR-1/GR-2)5 steps

View all Aquilion 16 (TSX-101A) guides

Source: 2C201-160E*F p.60-66. Preview re-authored by FSELIB — the full procedure with figures and steps is in the paid service manual.