InstallationRecon/ConsoleAdjust
Confirm console startup, check the audio system and set up the console software
Before the couch is anchored, confirm the console powers up cleanly, verify the gantry/console intercom in both directions (adjusting the SS/ADI3 volume/tone trimmers if it isn't right), then enter the site's identification and configuration data into both the S-CON and the D-CON so the system knows whose hospital, which reconstruction engine, and which line frequency it's running on.
Applies to
Aquilion 16 (TSX-101A) — Installation manual (source 2C201-160), Section 11 ("Operational Check of the Console"): 11.1 power-supply startup, 11.2 audio system check and SS/ADI3 VR adjustment, and 11.3.1 software setting on both the S-CON and the D-CON.
Personnel
1 technician · Basic — listening/functional confirmation and software data entry, plus (only if the audio check fails) a small-tool trim of the SS/ADI3 PWB's VR1/VR2/VR3/VR5/VR6/VR8/VR9 trimmers; entering serial number, station ID, hospital name, reconstruction unit, line frequency and mic-control selections on the S-CON and D-CON via Utility → Engineering → System Tool. No electrical measurement or component replacement is described in this section (skill assessment derived from procedure content — not an OEM-stated skill level).
Steps
9 steps
Source
2C201-160E*F p.104-107
Full step-by-step for Confirm console startup, check the audio system and set up the console software
All 9 steps are documented in the FSELIB Aquilion 16 (TSX-101A) service manual — re-authored, web-first, with the real figures from the source.
Open the full procedureRelated Recon/Console guides
Place the couch and console and install the RDD HDDs9 stepsConsole cleaning, fans, PC input and DC power-supply checks — 6.1-6.115 stepsRun the console malfunction-diagnosis program (hwtest)0 stepsRun the independent MHR PWB test (diagnostics) from the RTM terminal4 stepsRemove the host PC unit (PX74-07959 GR-1/GR-2)4 stepsRemove the host PC unit (PX74-08766 GR-1/GR-2)5 steps
View all Aquilion 16 (TSX-101A) guidesSource: 2C201-160E*F p.104-107. Preview re-authored by FSELIB — the full procedure with figures and steps is in the paid service manual.