What should a field engineer do about 90F10000?

Check the scan system status/log for the underlying fault; restart the scan system application if needed and confirm normal operation before resuming scanning.. Isolate the SS (Scan System) subsystem and follow the status-code troubleshooting in the service manual. FSELIB documents the full diagnosis and remedy for the Aquilion RX / V4-62R004 / V3.20R003 / Aquilion ONE / V4.2.

Information / dialogSS (Scan System)

90F10000 — Error occurred in the scan system (SS)

Q: What is Canon Medical (Toshiba) CT error code 90F10000?

Error occurred in the scan system (SS). It is reported by the SS (Scan System) on Aquilion RX / V4-62R004 and V3.20R003 and Aquilion ONE / V4.2 CT systems. Severity: Information / dialog; subsystem: SS (Scan System).

Canon Medical (Toshiba) CT error code, reported by the SS (Scan System).

What 90F10000 means

On Aquilion RX / V4-62R004 and V3.20R003 and Aquilion ONE / V4.2 CT systems, status code 90F10000 indicates: Error occurred in the scan system (SS). The code originates in the SS (Scan System) section of the SS (Scan System). Severity level 1 (Information / dialog).

Reported action: Check the scan system status/log for the underlying fault; restart the scan system application if needed and confirm normal operation before resuming scanning..

Reported on Aquilion RX/V4-62R004, V3.20R003 and Aquilion ONE/V4.2 from the 2:Device SS table as a general Scan System error.

Full troubleshooting for 90F10000

The complete diagnosis, cause tree, and step-by-step remedy for the SS (Scan System) subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related SS (Scan System) codes

80000000Scan system error, possible system call failure 807A1101Couch movement interrupted 807A1200Aborted helical scan 80FC0000Warmup interrupted 00000001RECON unit ended abnormally, reconstruction queue full 00000002RECON unit timed out — restart the reconstruction queue 00000003RECON unit failed to start — delete the reconstruction queue 00000004Helical scan aborted, reconstruction request not accepted

Related service procedures

Run the console malfunction-diagnosis program (hwtest)Console (Diagnostics)Run the independent MHR PWB test (diagnostics) from the RTM terminalConsole (Diagnostics)Remove the host PC unit (PX74-07959 GR-1/GR-2)Console (Operation)Remove the host PC unit (PX74-08766 GR-1/GR-2)Console (Operation)Remove and install an RDD disk/power-supply unit (Rorke Data)Console (Recon)Remove and install an RDD fan unit (Rorke Data)Console (Recon)

Discuss 90F10000 with other field engineers in the FSELIB forum

Source: errmsg.eng — 2:Device SS table. Reference information re-authored by FSELIB — not a copy of the OEM manual.