What should a field engineer do about C0900007?

Note the exact time the alarm was raised and pull the RTM and reconstruction log entries around it, then retry the reconstruction. If the code returns, check the RTM board and the links it drives for related alarms and follow the service manual's RTM troubleshooting guidance.. Isolate the RTM — ELCTL subsystem and follow the status-code troubleshooting in the service manual. FSELIB documents the full diagnosis and remedy for the Aquilion RX / V4-62R004 / V3.20R003 / Aquilion ONE / V4.2 / Aquilion S16 / Asteion Super4 / Aquilion 16.

AlarmRTM — ELCTL

C0900007 — Reconstruction process error reported by the RTM (ELCTL)

Q: What is Canon Medical (Toshiba) CT error code C0900007?

Reconstruction process error reported by the RTM (ELCTL). It is reported by the RTM (Real Time Manager) — ELCTL on Aquilion RX / V4-62R004 and V3.20R003 and Aquilion ONE / V4.2 and Aquilion S16 and Asteion Super4 and Aquilion 16 CT systems. Severity: Alarm; subsystem: RTM — ELCTL.

Canon Medical (Toshiba) CT error code, reported by the RTM (Real Time Manager) — ELCTL.

What C0900007 means

On Aquilion RX / V4-62R004 and V3.20R003 and Aquilion ONE / V4.2 and Aquilion S16 and Asteion Super4 and Aquilion 16 CT systems, status code C0900007 indicates: Reconstruction process error reported by the RTM (ELCTL). The code originates in the RTM — ELCTL section of the RTM (Real Time Manager) — ELCTL. Severity level A0 (Alarm).

Reported action: Note the exact time the alarm was raised and pull the RTM and reconstruction log entries around it, then retry the reconstruction. If the code returns, check the RTM board and the links it drives for related alarms and follow the service manual's RTM troubleshooting guidance..

Toshiba/Canon Aquilion RX (V4-62R004), V3.20R003, Aquilion ONE (V4.2), Aquilion S16, Asteion Super4 and Aquilion 16 CT systems. The service error-message table lists this code under the "Device RTM ELCTL" group with the message "Error in recon-process." The RTM (real time manager) is the console's master real-time control board; on the Aquilion 16 it sits in the cPCI chassis and controls the cPCI chassis, the SS/ADI and the gantry.

Full troubleshooting for C0900007

The complete diagnosis, cause tree, and step-by-step remedy for the RTM — ELCTL subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related RTM — ELCTL codes

C0900010Abnormal scan condition found by the RTM (ELCTL)C0900011Abnormal scan condition found by the RTM (ELCTL)C0900012Abnormal scan condition found by the RTM (ELCTL)C0900013Abnormal scan condition found by the RTM (ELCTL)00000001RECON unit ended abnormally, reconstruction queue full 00000002RECON unit timed out — restart the reconstruction queue 00000003RECON unit failed to start — delete the reconstruction queue 00000004Helical scan aborted, reconstruction request not accepted

Related service procedures

Run the console malfunction-diagnosis program (hwtest)Console (Diagnostics)Run the independent MHR PWB test (diagnostics) from the RTM terminalConsole (Diagnostics)Remove the host PC unit (PX74-07959 GR-1/GR-2)Console (Operation)Remove the host PC unit (PX74-08766 GR-1/GR-2)Console (Operation)Remove and install an RDD disk/power-supply unit (Rorke Data)Console (Recon)Remove and install an RDD fan unit (Rorke Data)Console (Recon)

Discuss C0900007 with other field engineers in the FSELIB forum

Source: Toshiba/Canon CT service error message table (errmsg.eng), device group "Device RTM ELCTL". Reference information re-authored by FSELIB — not a copy of the OEM manual.