What is Canon Medical (Toshiba) CT error code B1361000?

Error in Gantry Rotation. It is reported by the GTS (Gantry + Table System) controller on Activion16 and Aquilion RX CT systems. Severity: Alarm — high severity; subsystem: Gantry.

What should a field engineer do about B1361000?

Contact your service representative.. Isolate the Gantry subsystem and follow the GTS status-code troubleshooting in the service manual. FSELIB documents the full diagnosis and remedy for the Activion16 (TSX-031A).

Alarm — high severityGantry

B1361000 — Error in Gantry Rotation

Canon Medical (Toshiba) CT error code, reported by the GTS (Gantry + Table System) controller.

What B1361000 means

On Activion16 and Aquilion RX CT systems, status code B1361000 indicates: Error in Gantry Rotation. The code originates in the Gantry section of the GTS (Gantry + Table System) controller. Severity level A1 (Alarm — high severity).

Reported action: Contact your service representative..

Toshiba / Canon Medical CT systems that use the GTS (Gantry + Table System) controller, including the Activion16 (TSX-031A) and the Aquilion family.

Full troubleshooting for B1361000

The complete diagnosis, cause tree, and step-by-step remedy for the Gantry subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related Gantry codes

B1300000Error in Wedge movement B1320000Error in Slit movement B1330000Error in BeamTrimmer movement B1350000Error in Gantry Tilt B1360000Error in Gantry Rotation B13F0000Gantry is not powered ON B1400000Patient touched the Gantry B1530000Cannot start CT scan due to PET gantry not being at the parking position

Discuss B1361000 with other field engineers in the FSELIB forum

Source: Toshiba/Canon CT service error message table (errmsg.eng). Reference information re-authored by FSELIB — not a copy of the OEM manual.