Skip to main content
ProcedureConsoleReplacement/FRUReplace

Replace disk drive, power supply, or fan units in the BSX74-1900E raw data disk array

Remove and install the field-replaceable disk drive units, the power supply unit, and the fan units of the BSX74-1900E raw data disk array (RDD) — the JBOD dual-loop fiber-channel array that stores raw scan data, reconstruction functions, and correction data sets for the console.

Applies to
Activion16 (TSX-031A). Covers the raw data disk array (RDD) unit assembly BSX74-1900E only — its disk drive units, its power supply unit (bay PS0), and its two fan units. The mechanically-identical sibling procedure for the BSX74-2035E variant (power supply in bay PS1 instead, per §4.6.9 — cross-ref, not stated in §4.6.8) is a separate atom — see Related.
Personnel
1 technician · Field service engineer (CT console / raw data disk array (RDD) hardware)
Steps
9 steps
Source
2D201-113EN*J §4.6.8.5 'Procedures for removing/installing the disk drive unit/power supply unit' (pp.461-463) and §4.6.8.6 'Procedures for removing/installing the fan unit' (p.464) — BSX74-1900E raw data disk array

Tools & parts

ItemPart numberQty
Disk drive unit (Fibre-channel HDD, mounted in its carrier)n/a in sourceup to 5 (slots #1 to #5)
Power supply unit (mounted in its carrier)n/a in source1
Fan unitn/a in source2

Safety

NOTICE

Hazard: Subjecting the disk drive unit or power supply unit to shock while it is being removed or inserted (Precautions, p.463) — source specifically calls out the disk drive as particularly shock-sensitive

Consequence: Equipment damage to the shock-sensitive disk drive unit; source gives no personal-injury language for this step

Avoidance: Do not subject the unit to shocks during removal or insertion

NOTICE

Hazard: Reinstalling a removed disk drive unit in a different numbered slot than the one it was removed from

Consequence: The stored data becomes invalid if the arrangement of the disks changes

Avoidance: Before removing a disk drive unit that will be reused, write down the number of the slot it came from, so it can be remounted in the same slot

Full step-by-step for Replace disk drive, power supply, or fan units in the BSX74-1900E raw data disk array

All 9 steps are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with the real figures from the source.

7-day free trial · no credit card required

Related Console guides

View all Activion16 (TSX-031A) guides

Related error codes

Source: 2D201-113EN*J §4.6.8.5 'Procedures for removing/installing the disk drive unit/power supply unit' (pp.461-463) and §4.6.8.6 'Procedures for removing/installing the fan unit' (p.464) — BSX74-1900E raw data disk array. Preview re-authored by FSELIB — the full procedure with figures and steps is in the paid service manual.

“That they may see, and know, and consider, and understand together, that the hand of the LORD hath done this.”Isaiah 41:20