What should a field engineer do about 7041?

Reconstruction ( FIRST ) was canceled ( incorrect phase ). : Set up the phase which can create all the images. 7041: (Image omission occurred in ECG / RGR Helical)Error - Reconstruction ( ARGV1 ) was canceled ( incorrect phase ). : Set up the phase which can create all the images.. Isolate the ECG / cardiac gating subsystem and follow the status-code troubleshooting in the service manual. FSELIB documents the full diagnosis and remedy for the Aquilion 16 / Aquilion RX / Aquilion ONE / Aquilion S16 / Asteion Super4 / Activion16.

Error conditionECG / cardiac gating

7041 — Image omission occurred in ECG / RGR Helical

Q: What is Canon Medical (Toshiba) CT error code 7041?

Image omission occurred in ECG / RGR Helical. It is reported by the console error system (EMS) on Aquilion 16 and Aquilion RX and Aquilion ONE and Aquilion S16 and Asteion Super4 and Activion16 CT systems. Severity: Error condition; subsystem: ECG / cardiac gating.

Canon Medical (Toshiba) CT error code, reported by the console error system (EMS).

What 7041 means

On Aquilion 16 and Aquilion RX and Aquilion ONE and Aquilion S16 and Asteion Super4 and Activion16 CT systems, status code 7041 indicates: Image omission occurred in ECG / RGR Helical. The code originates in the ECG / cardiac gating section of the console error system (EMS). Severity level error (Error condition).

Reported action: Reconstruction ( FIRST ) was canceled ( incorrect phase ). : Set up the phase which can create all the images. 7041: (Image omission occurred in ECG / RGR Helical)Error - Reconstruction ( ARGV1 ) was canceled ( incorrect phase ). : Set up the phase which can create all the images..

Reported by the Toshiba/Canon CT console error system (errmsg.eng / EMS error message table), shared across the Aquilion, Asteion and Activion CT platforms.

Full troubleshooting for 7041

The complete diagnosis, cause tree, and step-by-step remedy for the ECG / cardiac gating subsystem are documented in the FSELIB Canon Medical (Toshiba) service manual — re-authored, web-first, with real figures.

Start free trial Open the service manual

7-day free trial · no credit card required

Related ECG / cardiac gating codes

2136Low-mA timeout with ECG modulation 2216XC Hard timer error(ECG, non-ECG switching timing delay)2217XC is abnormal operation and SS is stopped(ECG, non-ECG switching timing the time of the request)5027ECG Signal error : It happened following action is not happened in 5 sec. after monitoring scan skip. No R-wave information.7042Image omission occurred in ECG / RGR Helical 00000001RECON unit ended abnormally, reconstruction queue full 00000002RECON unit timed out — restart the reconstruction queue 00000003RECON unit failed to start — delete the reconstruction queue

Related service procedures

Run the console malfunction-diagnosis program (hwtest)Console (Diagnostics)Run the independent MHR PWB test (diagnostics) from the RTM terminalConsole (Diagnostics)Remove the host PC unit (PX74-07959 GR-1/GR-2)Console (Operation)Remove the host PC unit (PX74-08766 GR-1/GR-2)Console (Operation)Remove and install an RDD disk/power-supply unit (Rorke Data)Console (Recon)Remove and install an RDD fan unit (Rorke Data)Console (Recon)

Discuss 7041 with other field engineers in the FSELIB forum

Source: errmsg.eng — Toshiba/Canon CT console (EMS) error message table. Reference information re-authored by FSELIB — not a copy of the OEM manual.