AlarmOutput Sorter Module — Position Sensors

HC10835 — Fourth output tray position sensor S28 not connected or malfunctioning

Agfa CT error code, reported by the Output Sorter Module.

What HC10835 means

On DryStar 5500 and DryStar 5503 CT systems, status code HC10835 indicates: Fourth output tray position sensor S28 not connected or malfunctioning. The code originates in the Output Sorter Module — Position Sensors section of the Output Sorter Module. Severity level alarm (Alarm).

Reported action: Check the connections to S28, then connector P30 on the MEC board, then the wiring between S28 and MEC/P30 with a multimeter, fixing whatever is not OK. If the wiring is good, power off the printer and replace S28; if the fault stays, the MEC board itself has to be replaced..

Raised on the DryStar 5500/5503 output sorter module when the fourth output tray position sensor S28 is not connected or is malfunctioning. The printer shows "Call service". Filed with the other output-sorter fault codes (HC10823, HC10831-HC10835, HC10907-HC10909, HC11223-HC11224, HC11238-HC11241).

Full troubleshooting for HC10835

The complete diagnosis, cause tree, and step-by-step remedy for the Output Sorter Module — Position Sensors subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related Output Sorter Module — Position Sensors codes

HC10823Sorter exit sensor S27 not connected or malfunctioningHC10831Sorter entry sensor S25 not connected or malfunctioningHC10832First output tray position sensor S31 not connected or malfunctioningHC10833Second output tray position sensor S30 not connected or malfunctioningHC10834Third output tray position sensor S29 not connected or malfunctioningHC11239Sorter entry sensor S25 triggered by residual jammed film at startupHC11240Sorter exit sensor S27 stuck on (continuous activation) at startupHC11241Sorter exit sensor S27 triggered by residual jammed film at startup
Discuss HC10835 with other field engineers in the FSELIB forum

Source: AGFA DryStar service manual — HC error catalogue (FSELIB authored corpus). Reference information re-authored by FSELIB — not a copy of the OEM manual.