What is Agfa CT error code HC10832?

First output tray position sensor S31 not connected or malfunctioning. It is reported by the Output Sorter Module on DryStar 5500 and DryStar 5503 CT systems. Severity: Alarm; subsystem: Output Sorter Module — Position Sensors.

AlarmOutput Sorter Module — Position Sensors

HC10832 — First output tray position sensor S31 not connected or malfunctioning

Agfa CT error code, reported by the Output Sorter Module.

What HC10832 means

On DryStar 5500 and DryStar 5503 CT systems, status code HC10832 indicates: First output tray position sensor S31 not connected or malfunctioning. The code originates in the Output Sorter Module — Position Sensors section of the Output Sorter Module. Severity level alarm (Alarm).

Reported action: Check the connections to S31, then connector P30 on the MEC board, then the wiring between S31 and MEC/P30 with a multimeter, fixing whatever is not OK. If the wiring is good, power off the printer and replace S31; if the fault stays, the MEC board itself has to be replaced..

Raised on the DryStar 5500/5503 output sorter module when the first output tray position sensor S31 is not connected or is malfunctioning. The printer shows "Call service". Filed with the other output-sorter fault codes (HC10823, HC10831-HC10835, HC10907-HC10909, HC11223-HC11224, HC11238-HC11241).

Full troubleshooting for HC10832

The complete diagnosis, cause tree, and step-by-step remedy for the Output Sorter Module — Position Sensors subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related Output Sorter Module — Position Sensors codes

HC10823Sorter exit sensor S27 not connected or malfunctioning HC10831Sorter entry sensor S25 not connected or malfunctioning HC10833Second output tray position sensor S30 not connected or malfunctioning HC10834Third output tray position sensor S29 not connected or malfunctioning HC10835Fourth output tray position sensor S28 not connected or malfunctioning HC11239Sorter entry sensor S25 triggered by residual jammed film at startup HC11240Sorter exit sensor S27 stuck on (continuous activation) at startup HC11241Sorter exit sensor S27 triggered by residual jammed film at startup

Discuss HC10832 with other field engineers in the FSELIB forum

Source: AGFA DryStar service manual — HC error catalogue (FSELIB authored corpus). Reference information re-authored by FSELIB — not a copy of the OEM manual.