ProcedureFilm transportReplacement/FRUReplacement
Replace the Pick up module
Swap the DryStar 5300's Pick up module (spare part CM+343331.X) by opening the Output tray and clearing the Input tray to reach it, then removing 4 screws (A).
Applies to
Drystar 5300, Type 5365/100 (source Chapter 3.5, Section 3.3, Repair and Service: Replacement of Parts, Edition 1, Revision 7, 2005-08-05) — replacement procedure for the Pick up module, spare part CM+343331.X, reached through the Output tray and the Input tray. This is the module the error catalogue designates MOD02 (see Related).
Personnel
1 technician · Basic field-service skill — open the Output tray, clear the Input tray, remove and refit 4 screws (A), and lift the module in/out. No calibration, software step, or special test equipment is involved.
Steps
8 steps
Source
DD+DIS270.05E — Drystar 5300, Repair and Service: Replacement of Parts, Section 3.3 Pick up module, Chapter 3.5/57-59 (document p.331-333), Edition 1, Revision 7 (2005-08-05)
Tools & parts
| Item | Part number | Qty |
|---|---|---|
| Pick up module | CM+343331.X | 1 |
| Crosshead screwdriver | — | 1 |
Full step-by-step for Replace the Pick up module
All 8 steps are documented in the FSELIB DryStar 5300 service manual — re-authored, web-first, with the real figures from the source.
Open the full procedureRelated Film transport guides
Loading Film into the Input Tray10 stepsAdjusting the Film Positioner Unit to 11x14 Inch9 stepsReplace the Extension cable block module11 stepsReplace the Input block module7 stepsReplace the Input tray10 stepsReplace the Output module0 steps
View all DryStar 5300 guidesSource: DD+DIS270.05E — Drystar 5300, Repair and Service: Replacement of Parts, Section 3.3 Pick up module, Chapter 3.5/57-59 (document p.331-333), Edition 1, Revision 7 (2005-08-05). Preview re-authored by FSELIB — the full procedure with figures and steps is in the paid service manual.