ProcedureFilm transportReplacement
Replace the Output module
This procedure covers removing and reinstalling the Drystar 5300's Output module (spare part CM+343330.X), a single-tool job that brackets around the separate Front cover procedure.
Applies to
Drystar 5300, Type 5365/100 (source Chapter 3.5 §3.2 'Output module', Edition 1 Revision 7, 2005-08-05)
Personnel
1 technician · Basic — mechanical module removal/reinstallation with one hand tool (2 screws, 2 connectors); source calls for no adjustment, calibration, or electrical testing in this procedure
Steps
0 steps
Source
DD+DIS270.05E — Drystar 5300, Repair and Service: Replacement of Parts, Chapter 3.5 §3.2 'Output module', pages 55-56 relative / 329-330 absolute, Edition 1 Revision 7 (2005-08-05)
Tools & parts
| Item | Part number | Qty |
|---|---|---|
| Output module | CM+343330.X | 1 |
| Crosshead screwdriver | n/a in source | 1 |
Full step-by-step for Replace the Output module
All 0 steps are documented in the FSELIB DryStar 5300 service manual — re-authored, web-first, with the real figures from the source.
Open the full procedureRelated Film transport guides
Loading Film into the Input Tray10 stepsAdjusting the Film Positioner Unit to 11x14 Inch9 stepsReplace the Extension cable block module11 stepsReplace the Input block module7 stepsReplace the Input tray10 stepsReplace the Pick up module8 steps
View all DryStar 5300 guidesSource: DD+DIS270.05E — Drystar 5300, Repair and Service: Replacement of Parts, Chapter 3.5 §3.2 'Output module', pages 55-56 relative / 329-330 absolute, Edition 1 Revision 7 (2005-08-05). Preview re-authored by FSELIB — the full procedure with figures and steps is in the paid service manual.