What is Philips CT error code WS-DISABLED?

Selected workstation is not enabled in the generator setup. It is reported by the Generator (GEST) on DuraDiagnost F30 DR CT systems. Severity: Warning; subsystem: Generator Configuration / Workstation Setup.

WarningGenerator Configuration / Workstation Setup

WS-DISABLED — Selected workstation is not enabled in the generator setup

Philips CT error code, reported by the Generator (GEST).

What WS-DISABLED means

On DuraDiagnost F30 DR CT systems, status code WS-DISABLED indicates: Selected workstation is not enabled in the generator setup. The code originates in the Generator Configuration / Workstation Setup section of the Generator (GEST). Severity level warning (Warning).

Reported action: Select another workstation to continue or, if necessary, enable the workstation using the GEST PC Program, per the OEM message..

From the Generator "Messages to Operator and User" table in the Philips DuraDiagnost F30 DR Technical Manual (DMR293226 REV 04). Shown when the selected workstation is not enabled in the generator setup.

Full troubleshooting for WS-DISABLED

The complete diagnosis, cause tree, and step-by-step remedy for the Generator Configuration / Workstation Setup subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related Generator Configuration / Workstation Setup codes

10052Application error on the Eleva Workspot when the operating-software DVD is not removed E061ABeam1 X signal path error E061BBeam2 X signal path error E061CBeam3 X signal path error E061DBeam0 Y signal path error E061EBeam1 Y signal path error E061FBeam2 Y signal path error E0620Beam3 Y signal path error

Discuss WS-DISABLED with other field engineers in the FSELIB forum

Source: Philips DuraDiagnost F30 DR Technical Manual (DMR293226 REV 04) — Generator User Messages table. Reference information re-authored by FSELIB — not a copy of the OEM manual.