Warning — recoverable conditionHost computer (HP Workstation x2100)

0010H — CMOS checksum error (BIOS settings corrupted)

Philips CT error code, reported by the Host Computer (HP Workstation x2100 EMU/BIOS).

What 0010H means

On Infinion 1.5T CT systems, status code 0010H indicates: CMOS checksum error (BIOS settings corrupted). The code originates in the Host computer (HP Workstation x2100) section of the Host Computer (HP Workstation x2100 EMU/BIOS). Severity level warning (Warning — recoverable condition).

Reported action: Enter BIOS Setup (press F2) and restore default settings, or clear the CMOS per the Clearing the CMOS procedure, then reconfigure the workstation. The document's related runtime message states: "System CMOS checksum bad – run Setup: CMOS contents have changed between two power-on sessions. Run Setup for configuration.".

Documented as EMU code 0010h in the Error Message Summary table of the HP Workstation x2100 Troubleshooting Guide, part of the Philips Infinion 1.5T MR system service documentation set. Cause/Symptom: "CMOS Checksum error (if no serial EEPROM)"; short message: "Incorrect CMOS Checksum". Not confirmed by this document for other Philips systems.

Full troubleshooting for 0010H

The complete diagnosis, cause tree, and step-by-step remedy for the Host computer (HP Workstation x2100) subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related Host computer (HP Workstation x2100) codes

0000HUnclassified POST error (EMU code not matched to a specific fault)0011HSystem date and time lost from CMOS/SE2P backup0012HPC configuration lost (CMOS and SE2P backup both lost)0020HAT option ROM POST error0040HCorrupted or missing system serial number0041Invalid or uninitialized internal product-type flag0060HRemote Power On (RPO) initialization failure0100HKeyboard error — stuck key detected at POST
Discuss 0010H with other field engineers in the FSELIB forum

Source: Philips Infinion 1.5T MR system service documentation — HP Workstation x2100 Technical Reference/Troubleshooting Guide (Chapter 4, Error Message Summary). Reference information re-authored by FSELIB — not a copy of the OEM manual.