What is Philips CT error code VERIFY-DAP-CHAMBER?

DAP chamber interconnection to the generator needs verification. It is reported by the Generator (GEST) / Dose Management on DuraDiagnost F30 DR CT systems. Severity: Warning; subsystem: DAP / Dose Management.

What should a field engineer do about VERIFY-DAP-CHAMBER?

Examine the interconnection of the DAP device to the generator, per the OEM message.. Isolate the DAP / Dose Management subsystem and follow the status-code troubleshooting in the service manual. FSELIB documents the full diagnosis and remedy for the DuraDiagnost F30 DR.

WarningDAP / Dose Management

VERIFY-DAP-CHAMBER — DAP chamber interconnection to the generator needs verification

Philips CT error code, reported by the Generator (GEST) / Dose Management.

What VERIFY-DAP-CHAMBER means

On DuraDiagnost F30 DR CT systems, status code VERIFY-DAP-CHAMBER indicates: DAP chamber interconnection to the generator needs verification. The code originates in the DAP / Dose Management section of the Generator (GEST) / Dose Management. Severity level warning (Warning).

Reported action: Examine the interconnection of the DAP device to the generator, per the OEM message..

From the Generator "Messages to Operator and User" table in the Philips DuraDiagnost F30 DR Technical Manual (DMR293226 REV 04). The OEM table classifies it as a DAP-option message (systems fitted with the Dose Area Product option) and gives no further description beyond the required action.

Full troubleshooting for VERIFY-DAP-CHAMBER

The complete diagnosis, cause tree, and step-by-step remedy for the DAP / Dose Management subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related DAP / Dose Management codes

ACCUMULATED DOSE EXCEEDEDAccumulated Dose Exceeded — alarm blocks further exposure on the same patient 10052Application error on the Eleva Workspot when the operating-software DVD is not removed E061ABeam1 X signal path error E061BBeam2 X signal path error E061CBeam3 X signal path error E061DBeam0 Y signal path error E061EBeam1 Y signal path error E061FBeam2 Y signal path error

Discuss VERIFY-DAP-CHAMBER with other field engineers in the FSELIB forum

Source: Philips DuraDiagnost F30 DR Technical Manual (DMR293226 REV 04) — Generator User Messages table. Reference information re-authored by FSELIB — not a copy of the OEM manual.