What is Philips CT error code E201F?

Dell remote access controller (DRAC) configuration failure. It is reported by the MND Extended Storage Server (Dell PowerEdge 2900 hardware) on Mobile Network Device (MND) Extended Storage Option CT systems. Severity: Warning — recoverable condition; subsystem: Remote Access Controller (DRAC).

What should a field engineer do about E201F?

Check the screen for specific error messages. Ensure DRAC cables and connectors are properly seated; if the problem persists, see the DRAC documentation.. Isolate the Remote Access Controller (DRAC) subsystem and follow the status-code troubleshooting in the service manual. FSELIB documents the full diagnosis and remedy for the Mobile Network Device (MND) Extended Storage Option.

Warning — recoverable conditionRemote Access Controller (DRAC)

E201F — Dell remote access controller (DRAC) configuration failure

Philips CT error code, reported by the MND Extended Storage Server (Dell PowerEdge 2900 hardware).

What E201F means

On Mobile Network Device (MND) Extended Storage Option CT systems, status code E201F indicates: Dell remote access controller (DRAC) configuration failure. The code originates in the Remote Access Controller (DRAC) section of the MND Extended Storage Server (Dell PowerEdge 2900 hardware). Severity level warning (Warning — recoverable condition).

Reported action: Check the screen for specific error messages. Ensure DRAC cables and connectors are properly seated; if the problem persists, see the DRAC documentation..

Listed as an LCD front-panel status/error code ('DRAC Config', Table 2 LCD Status Messages, p.26).

Full troubleshooting for E201F

The complete diagnosis, cause tree, and step-by-step remedy for the Remote Access Controller (DRAC) subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related Remote Access Controller (DRAC) codes

10052Application error on the Eleva Workspot when the operating-software DVD is not removed E061ABeam1 X signal path error E061BBeam2 X signal path error E061CBeam3 X signal path error E061DBeam0 Y signal path error E061EBeam1 Y signal path error E061FBeam2 Y signal path error E0620Beam3 Y signal path error

Discuss E201F with other field engineers in the FSELIB forum

Source: Philips Mobile Network Device (MND) Extended Storage Option Troubleshooting Guide, Rev A — 4598 004 17081 (LCD Status Messages table). Reference information re-authored by FSELIB — not a copy of the OEM manual.