What is Philips CT error code E1A18?

Power distribution board control cable is unseated, missing, or bad. It is reported by the MND Extended Storage Server (Dell PowerEdge 2900 hardware) on Mobile Network Device (MND) Extended Storage Option CT systems. Severity: Warning — recoverable condition; subsystem: Power Distribution Board.

What should a field engineer do about E1A18?

Ensure the power distribution board control cable is seated properly. If the problem persists, replace it — see Installing the Power Distribution Board in the PowerEdge 2900 Hardware Manual.. Isolate the Power Distribution Board subsystem and follow the status-code troubleshooting in the service manual. FSELIB documents the full diagnosis and remedy for the Mobile Network Device (MND) Extended Storage Option.

Warning — recoverable conditionPower Distribution Board

E1A18 — Power distribution board control cable is unseated, missing, or bad

Philips CT error code, reported by the MND Extended Storage Server (Dell PowerEdge 2900 hardware).

What E1A18 means

On Mobile Network Device (MND) Extended Storage Option CT systems, status code E1A18 indicates: Power distribution board control cable is unseated, missing, or bad. The code originates in the Power Distribution Board section of the MND Extended Storage Server (Dell PowerEdge 2900 hardware). Severity level warning (Warning — recoverable condition).

Reported action: Ensure the power distribution board control cable is seated properly. If the problem persists, replace it — see Installing the Power Distribution Board in the PowerEdge 2900 Hardware Manual..

Listed as an LCD front-panel status/error code ('PDB Ctrl Cable', Table 2 LCD Status Messages, p.25).

Full troubleshooting for E1A18

The complete diagnosis, cause tree, and step-by-step remedy for the Power Distribution Board subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related Power Distribution Board codes

10052Application error on the Eleva Workspot when the operating-software DVD is not removed E061ABeam1 X signal path error E061BBeam2 X signal path error E061CBeam3 X signal path error E061DBeam0 Y signal path error E061EBeam1 Y signal path error E061FBeam2 Y signal path error E0620Beam3 Y signal path error

Discuss E1A18 with other field engineers in the FSELIB forum

Source: Philips Mobile Network Device (MND) Extended Storage Option Troubleshooting Guide, Rev A — 4598 004 17081 (LCD Status Messages table). Reference information re-authored by FSELIB — not a copy of the OEM manual.