What is Philips CT error code E1710?

System BIOS reported an I/O channel check error. It is reported by the MND Extended Storage Server (Dell PowerEdge 2900 hardware) on Mobile Network Device (MND) Extended Storage Option CT systems. Severity: Alarm — hardware fault; subsystem: System Bus / PCI-PCIe I/O.

What should a field engineer do about E1710?

See the Getting Help section (p.10) of the guide.. Isolate the System Bus / PCI-PCIe I/O subsystem and follow the status-code troubleshooting in the service manual. FSELIB documents the full diagnosis and remedy for the Mobile Network Device (MND) Extended Storage Option.

Alarm — hardware faultSystem Bus / PCI-PCIe I/O

E1710 — System BIOS reported an I/O channel check error

Philips CT error code, reported by the MND Extended Storage Server (Dell PowerEdge 2900 hardware).

What E1710 means

On Mobile Network Device (MND) Extended Storage Option CT systems, status code E1710 indicates: System BIOS reported an I/O channel check error. The code originates in the System Bus / PCI-PCIe I/O section of the MND Extended Storage Server (Dell PowerEdge 2900 hardware). Severity level alarm (Alarm — hardware fault).

Reported action: See the Getting Help section (p.10) of the guide..

Listed as an LCD front-panel status/error code ('I/O Channel Chk', Table 2 LCD Status Messages, p.22).

Full troubleshooting for E1710

The complete diagnosis, cause tree, and step-by-step remedy for the System Bus / PCI-PCIe I/O subsystem are documented in the FSELIB Philips service manual — re-authored, web-first, with real figures.

Start free trial Open the service manual

7-day free trial · no credit card required

Related System Bus / PCI-PCIe I/O codes

E1711System BIOS reported a PCI parity error on a component in a specific PCI slot/bus/device/function E1712System BIOS reported a PCI system error on a component in a specific PCI slot/bus/device/function E171FSystem BIOS reported a PCIe fatal error on a component in a specific PCIe slot/bus/device/function 0000HUnclassified POST error (EMU code not matched to a specific fault)0010HCMOS checksum error (BIOS settings corrupted)0011HSystem date and time lost from CMOS/SE2P backup 0012HPC configuration lost (CMOS and SE2P backup both lost)0020HAT option ROM POST error

Discuss E1710 with other field engineers in the FSELIB forum

Source: Philips Mobile Network Device (MND) Extended Storage Option Troubleshooting Guide, Rev A — 4598 004 17081 (LCD Status Messages table). Reference information re-authored by FSELIB — not a copy of the OEM manual.