200011D9 — System/software image update error
Philips CT error code, reported by the Software / firmware image update.
What 200011D9 means
On CT systems, status code 200011D9 indicates: System/software image update error. The code originates in the Software / firmware image update section of the Software / firmware image update. Severity level alarm (Software update failed).
Reported action: Verify the update media and repeat the image update procedure. If it fails again, check the log around the same timestamp for a Bad CRC entry (200011D0), and check the target storage device for faults before retrying..
From the Philips ultrasound service reference "Error Logger Overview" (New Error Logger), archived under Philips ultrasound End-of-Life service documentation. The source lists this Errno as "Image update error". A full log entry combines a 4-digit Subsystem code with the Errno (format ssss-eeeeeeee).
Full troubleshooting for 200011D9
The complete diagnosis, cause tree, and step-by-step remedy for the Software / firmware image update subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.
Open the Activion16 service manualRelated Software / firmware image update codes
Source: Philips Ultrasound (End of Life) — 10_Error Logger Overview, Reference documentation. Reference information re-authored by FSELIB — not a copy of the OEM manual.