10052 — Application error on the Eleva Workspot when the operating-software DVD is not removed
Philips CT error code, reported by the Eleva Workspot (workstation software).
What 10052 means
On DuraDiagnost 4.0 CT systems, status code 10052 indicates: Application error on the Eleva Workspot when the operating-software DVD is not removed. The code originates in the Eleva Workspot (workstation software) section of the Eleva Workspot (workstation software). Severity level warning (Warning — recoverable condition).
Reported action: Remove the operating-software DVD from the drive and restart the computer..
Documented for the DuraDiagnost 4.0 Eleva Workspot in the DuraDiagnost 4.0 service documentation (DMR214076 REV 09), in the operating-software installation procedure: the error is reported if the operating-software DVD is left in the drive at the point where it should be removed. Not confirmed by this document for other Eleva Workspot-based systems.
Full troubleshooting for 10052
The complete diagnosis, cause tree, and step-by-step remedy for the Eleva Workspot (workstation software) subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.
Open the Activion16 service manualRelated Eleva Workspot (workstation software) codes
Source: Philips DuraDiagnost 4.0 service documentation — DMR214076 REV 09 (Corrective Maintenance). Reference information re-authored by FSELIB — not a copy of the OEM manual.