AlarmRTM — ELCTL for Genesis

FC010000 — Pre-process error reported by RTM ELCTL

Canon Medical (Toshiba) CT error code, reported by the RTM (Real Time Manager) — ELCTL for Genesis.

What FC010000 means

On Aquilion RX / V4-62R004 and Aquilion ONE / V4.2 CT systems, status code FC010000 indicates: Pre-process error reported by RTM ELCTL. The code originates in the RTM — ELCTL for Genesis section of the RTM (Real Time Manager) — ELCTL for Genesis. Severity level A0 (Alarm).

Reported action: Note the exact fault time and check the pre-process/acquisition log for the affected scan, together with the status the RTM reports at that stage; if the error repeats, follow the RTM troubleshooting procedure in the service manual..

Toshiba/Canon Aquilion RX (V4-62R004) and Aquilion ONE (V4.2) CT systems, reported by the RTM (Real Time Manager) ELCTL process at the pre-process stage and logged in the "Device RTM ELCTL for Genesis" section of the service error-message table. The table prints the same message text ("Error in pre-process.") for FC020000 and FC030000 in that same section.

Full troubleshooting for FC010000

The complete diagnosis, cause tree, and step-by-step remedy for the RTM — ELCTL for Genesis subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related RTM — ELCTL for Genesis codes

FC020000Error in pre-process — RTM ELCTL (Genesis)FC030000Error in pre-process — RTM ELCTL (Genesis)FC040000Error in recon-process — RTM ELCTL (Genesis)FC050000Error in recon-process — RTM ELCTL (Genesis)FC060000Error in recon-process — RTM ELCTL (Genesis)FC070000Error in recon-process — RTM ELCTL (Genesis)FC100000An abnormal scan condition was found — RTM ELCTL (Genesis)FC110000An abnormal scan condition was found — RTM ELCTL (Genesis)

Related service procedures

Run the console malfunction-diagnosis program (hwtest)Console (Diagnostics)Run the independent MHR PWB test (diagnostics) from the RTM terminalConsole (Diagnostics)Remove the host PC unit (PX74-07959 GR-1/GR-2)Console (Operation)Remove the host PC unit (PX74-08766 GR-1/GR-2)Console (Operation)Remove and install an RDD disk/power-supply unit (Rorke Data)Console (Recon)Remove and install an RDD fan unit (Rorke Data)Console (Recon)
Discuss FC010000 with other field engineers in the FSELIB forum

Source: Toshiba/Canon CT service error message table (errmsg.eng, Device RTM ELCTL for Genesis, Aquilion RX V4-62R004 / Aquilion ONE V4.2). Reference information re-authored by FSELIB — not a copy of the OEM manual.