What should a field engineer do about 3341?

Lateral couch movement error detected. The couch can be used in safety mode. Drive the couch fully to the right then fully to the left to reset. If the problem persists call Service.. Isolate the Couch / table subsystem and follow the status-code troubleshooting in the service manual. FSELIB documents the full diagnosis and remedy for the Aquilion 16 / Aquilion RX / Aquilion ONE / Aquilion S16 / Asteion Super4 / Activion16.

Notification / statusCouch / table

3341 — Lateral movement of couch error, COMP error of warmup

Q: What is Canon Medical (Toshiba) CT error code 3341?

Lateral movement of couch error, COMP error of warmup. It is reported by the console error system (EMS) on Aquilion 16 and Aquilion RX and Aquilion ONE and Aquilion S16 and Asteion Super4 and Activion16 CT systems. Severity: Notification / status; subsystem: Couch / table.

Canon Medical (Toshiba) CT error code, reported by the console error system (EMS).

What 3341 means

On Aquilion 16 and Aquilion RX and Aquilion ONE and Aquilion S16 and Asteion Super4 and Activion16 CT systems, status code 3341 indicates: Lateral movement of couch error, COMP error of warmup. The code originates in the Couch / table section of the console error system (EMS). Severity level info (Notification / status).

Reported action: Lateral couch movement error detected. The couch can be used in safety mode. Drive the couch fully to the right then fully to the left to reset. If the problem persists call Service..

Reported by the Toshiba/Canon CT console error system (errmsg.eng / EMS error message table), shared across the Aquilion, Asteion and Activion CT platforms.

Full troubleshooting for 3341

The complete diagnosis, cause tree, and step-by-step remedy for the Couch / table subsystem are documented in the FSELIB Canon Medical (Toshiba) service manual — re-authored, web-first, with real figures.

Start free trial Open the service manual

7-day free trial · no credit card required

Related Couch / table codes

90000011Table height differs from the height used at scan time B1270000Error in Table movement B1370000Table stopped in illegal position B1380000Error in Couch movement(U/D)B1381000An error is detected in the chain for moving the bed vertically B1382000An error is detected in a signal from the motor for moving the bed vertically B1383000An error is detected in the motor for moving the bed vertically B1384000The bed moved in the opposite direction

Related service procedures

Run the console malfunction-diagnosis program (hwtest)Console (Diagnostics)Run the independent MHR PWB test (diagnostics) from the RTM terminalConsole (Diagnostics)Remove the host PC unit (PX74-07959 GR-1/GR-2)Console (Operation)Remove the host PC unit (PX74-08766 GR-1/GR-2)Console (Operation)Remove and install an RDD disk/power-supply unit (Rorke Data)Console (Recon)Remove and install an RDD fan unit (Rorke Data)Console (Recon)

Discuss 3341 with other field engineers in the FSELIB forum

Source: errmsg.eng — Toshiba/Canon CT console (EMS) error message table. Reference information re-authored by FSELIB — not a copy of the OEM manual.