GE Healthcare · MR2224846
The BegTravel and EndTravel parameters in MRconfig.cfg are set incorrectly.
Symptom
ACR Slice Position Accuracy Test Fails.
Error message
2224846 The encoder calibration value was invalid. Please run the cradle calibration routine. Specified Calibration Constant : 6196 Minimum Calibration Constant : 2250 Maximum Calibration Constant : 2750 2224846 pcmr NSP SCP:SRI 100 The encoder calibration value was invalid. Please run the cradle calibration routine. Specified Calibration Constant : 6196 Minimum Calibration Constant : 2250 Maximum Calibration Constant : 2750
Applies to
- Product
- Open Speed with EXCITE For HFO4 and HFO5 only
- Software
- OPENMR4-HFO4 Software version for HFO4 system, which is OpenSpeed with Excite Technology
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Cradle Moves Very Slow in the Longitudinal Direction.
- DQA Scan Completes but will not Calculate.
- The BegTravel and EndTravel parameters in MRconfig.cfg are set incorrectly.
- Unable to Boot Applications Software due to Software Corruption Caused by Repeated Power Brownouts.
- Cannot Boot Applications Due to Host Monitor Timeout Error
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.