Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
Symptom
There are Spikes on the Waveforms in the manual prescan Display Running Grafidy3. Y and Z axis B0 do not come into Specification. see long description The system is a 1.5T LX running 9.1 M4 s/w. FE just did a RF amp upgrade from Erbtec to SRFD2, and a Gradient upgrade from SGD to ACGD gradients. After installing the new hardware, he is running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows. Question this because he is not able to get Y axis B0 and Z axis B0 into spec. Tried another grafidy kit and found the same issue. .
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.
- Scan Aborted Due to Arrythmia Triggers caused by Patients Irregular Heart Beat.