ProcedureInterfaceInstallation

Setting Up Logical Printers (DICOM Print SCP)

Configure more than one DICOM Print SCP server — each with its own Called AE title — on the DryStar 5300 when a single connected modality (or a single PACS workstation) sends images from more than one application that need different printer-side settings.

Applies to

Drystar 5300, Type 5365 — source Chapter 1, "Controls, Connections and Set Up Procedures," Edition 1, Revision 10 (2006-01-26), §7.2 "Logical Printers Set-up," document p.59-63 (chapter-relative footers "Chapter 1/27" through "Chapter 1/31"). Applies whenever a single connected modality (or a single PACS workstation acting on behalf of more than one modality) needs the printer to distinguish between applications that require different print settings.

Personnel

1 technician · Basic-to-intermediate: browser navigation to the DICOM profile editor, understanding of DICOM AE titles/ports/associations, and — for the two-printer worked example — creating a second DICOM Host Profile with locked Kernel/interpolation settings. Source explicitly calls for coordinating the Kernel-checkbox-lock decision with the modality service engineer and/or the customer (p.63) before applying it. No hardware disassembly, calibration, or film handling is involved. Source assigns no formal skill-level label to this section (derived).

Steps

2 steps

Source

DD+DIS346.05E — Drystar 5300, Controls, Connections and Set Up Procedures, Chapter 1 §7.2 "Logical Printers Set-up", Edition 1, Revision 10 (2006-01-26), document p.59-63 (chapter-relative footers "Chapter 1/27" through "Chapter 1/31")

Full step-by-step for Setting Up Logical Printers (DICOM Print SCP)

All 2 steps are documented in the FSELIB DryStar 5300 service manual — re-authored, web-first, with the real figures from the source.

Open the full procedure

Related Interface guides

Image Adjustment Workflow and the Connectivity Release Document4 steps Adjusting Contrast and Sharpness at the Modality6 steps Setting Up the Printer-Modality DICOM Connection0 steps Perform CDM (internal densitometer) calibration7 steps Perform density reproduction check5 steps Check for dust stripes and perform TPH cleaning procedure7 steps

View all DryStar 5300 guides

Source: DD+DIS346.05E — Drystar 5300, Controls, Connections and Set Up Procedures, Chapter 1 §7.2 "Logical Printers Set-up", Edition 1, Revision 10 (2006-01-26), document p.59-63 (chapter-relative footers "Chapter 1/27" through "Chapter 1/31"). Preview re-authored by FSELIB — the full procedure with figures and steps is in the paid service manual.