What is Philips CT error code E1210?

CMOS battery missing or its voltage is out of the acceptable range. It is reported by the MND Extended Storage Server (Dell PowerEdge 2900 hardware) on Mobile Network Device (MND) Extended Storage Option CT systems. Severity: Alarm — hardware fault; subsystem: Battery (CMOS/RAID controller).

What should a field engineer do about E1210?

Per the guide, this LCD message's only listed corrective action is to see the NIC (Network Interface Card) Indicator Codes section (p.44); no CMOS-battery-specific field step is given in this table entry.. Isolate the Battery (CMOS/RAID controller) subsystem and follow the status-code troubleshooting in the service manual. FSELIB documents the full diagnosis and remedy for the Mobile Network Device (MND) Extended Storage Option.

Alarm — hardware faultBattery (CMOS/RAID controller)

E1210 — CMOS battery missing or its voltage is out of the acceptable range

Philips CT error code, reported by the MND Extended Storage Server (Dell PowerEdge 2900 hardware).

What E1210 means

On Mobile Network Device (MND) Extended Storage Option CT systems, status code E1210 indicates: CMOS battery missing or its voltage is out of the acceptable range. The code originates in the Battery (CMOS/RAID controller) section of the MND Extended Storage Server (Dell PowerEdge 2900 hardware). Severity level alarm (Alarm — hardware fault).

Reported action: Per the guide, this LCD message's only listed corrective action is to see the NIC (Network Interface Card) Indicator Codes section (p.44); no CMOS-battery-specific field step is given in this table entry..

Listed as an LCD front-panel status/error code ('CMOS Batt', Table 2 LCD Status Messages, p.20) for the Dell PowerEdge 2900-based server hardware in the Philips MND Extended Storage Option Troubleshooting Guide (Rev A, 4598 004 17081). Not confirmed by this document for other Philips systems.

Full troubleshooting for E1210

The complete diagnosis, cause tree, and step-by-step remedy for the Battery (CMOS/RAID controller) subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related Battery (CMOS/RAID controller) codes

E1211RAID controller (ROMB) battery missing, bad, or unable to recharge due to thermal issues 10052Application error on the Eleva Workspot when the operating-software DVD is not removed E061ABeam1 X signal path error E061BBeam2 X signal path error E061CBeam3 X signal path error E061DBeam0 Y signal path error E061EBeam1 Y signal path error E061FBeam2 Y signal path error

Discuss E1210 with other field engineers in the FSELIB forum

Source: Philips Mobile Network Device (MND) Extended Storage Option Troubleshooting Guide, Rev A — 4598 004 17081 (LCD Status Messages table). Reference information re-authored by FSELIB — not a copy of the OEM manual.