GE Healthcare · MR2240188
Cannot scan, getting Preamp Bias faults on all Coils.
Symptom
Cannot scan, getting Preamp Bias faults on all Coils.
Error message
2240188 Pre amplifier bias error was occurred on 0 degree port. Host: oc001 Process: NSP File: HPC PORT ID:spi srp Line: 1142 Pre amplifier bias error was occurred on 0 degree port. It may be neccessory to change the pre-amplifier box.
Applies to
- Product
- Profile 3 Ultrasparc CPU with AN8290Y gradients
- Component
- 2195463 Preamplifier box with Phase shifters Preamp must be tuned after replacement. See Rev.13 GE Yokogawa Service CD 2220946. Select Profile3/Profile4>Replacement>Table>Preamp Box Replacement>Step 4, click on "How" button on middle of page.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Cannot scan, getting Preamp Bias fault on one Coil.
- cannot scan with knee coil...getting preamp bias fault
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.