GE Healthcare · MR2240188
Cannot scan, getting Preamp Bias fault on one Coil.
Symptom
Cannot scan, getting Preamp Bias fault on one Coil.. Was able to scan with other coils, so issue isolated to a defective coil. Tried hard rebooting entire system and errors repeated with defective coil.
Error message
2240188 Pre amplifier bias error was occurred on 0 degree port. Host: oc001 Process: NSP File: HPC PORT ID:spi srp Line: 1142 Pre amplifier bias error was occurred on 0 degree port. It may be neccessory to change the pre-amplifier box.
Applies to
- Product
- Profile 3 Ultrasparc CPU with AN8290Y gradients
- Software
- Profile Contour 7.67 Applies to Profile1 through 4 and Contour1 through 4. This is the last revision of software for this product line. Requires 7.66 LFC. 7.67 is a patch.
- Component
- 2145548-3 KNEE COIL ASSY Alternate part number P9364KB KNEE COIL ASSY
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- cannot scan with knee coil...getting preamp bias fault
- Cannot scan, getting Preamp Bias faults on all Coils.
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.