GE Healthcare · MR22401882240187
cannot scan with knee coil...getting preamp bias fault
Symptom
Cannot scan, getting Preamp Bias fault on one Coil.. Was able to scan with other coils, so issue isolated to a defective coil. Tried hard rebooting entire system and errors repeated with defective coil.
Error message
2240188 Pre amplifier bias error was occurred on 0 degree port. Host: oc001 Process: NSP File: HPC PORT ID:spi srp Line: 1142 Pre amplifier bias error was occurred on 0 degree port. It may be neccessory to change the pre-amplifier box. 2240187 Undefined error code received from pre-amplifier. Wed Jun 29 10:40:41 2005 Error: 2240187 Host: oc001 Process: NSP File: HPC_PORT_ID:spi_srp Line: 1142 Undefined error code received from pre-amplifier.
Applies to
- Product
- Profile 3 Ultrasparc CPU with AN8290Y gradients
- Software
- Profile Contour 7.67 Applies to Profile1 through 4 and Contour1 through 4. This is the last revision of software for this product line. Requires 7.66 LFC. 7.67 is a patch.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Cannot scan, getting Preamp Bias fault on one Coil.
- Cannot scan, getting Preamp Bias faults on all Coils.
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.