GE Healthcare · X-ray Vascular2800052
INX100, Supervisor terminates after 3rd or 4th line is displayed on DL start.
Symptom
INX100, Supervisor terminates after 3rd or 4th line is displayed on DL start. DL will not boot into applications. No errors displayed. Hardware Detection identifies the SIB as a SIB instead of a Gitane. Supervisor terminates after 3rd or 4th line is displayed on DL start. DL will not boot into applications.
Error message
error Code = 2800052, error Text = Failure of IpServer during boot of the application, debug Text += component startup timeout, recovery Class = IH, major Function /= XRSubSysMgrDL System impact: System boot failure. Displayed message : "Boot failure - Reset system; If problem persists, call Service".
Applies to
- Product
- DLX 3 DLX 3 digital system DLX 3 digital system
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- INX100; When replacing the PPC2 IP board that does not have a SCSI connector with a replacement PPC Board that has the SCSI Connector on Zenith M4 systems, a SW reload is required
- During Innova Boot the system reports Failure of IpServer during boot of the application
- ID91159 Innova System boot failure
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…