GE Healthcare · X-ray VascularInnova2800019280001828000512800052
INX100; When replacing the PPC2 IP board that does not have a SCSI connector with a replacement PPC Board that has the S…
INX100; When replacing the PPC2 IP board that does not have a SCSI connector with a replacement PPC Board that has the SCSI Connector on Zenith M4 systems, a SW reload is required
Symptom
INX100; When replacing the PPC2 IP board that does not have a SCSI connector with a replacement PPC Board that has the SCSI Connector on Zenith M4 systems, a SW reload is required: When replacing the PPC2 IP board that does not have a SCSI connector with a replacement PPC Board that has the SCSI Connector on Zenith M4 systems, a SW reload is required
Error message
You may get error 2800019: Due to a possible CE hardware error, the IP is not available, followed by 2800018 A DL process has crashed, 2800051 Failure of IpInitTerm during boot of the application, 2800052 Failure of IpServer during boot of the application You may get error 2800019: Due to a possible CE hardware error, the IP is not available, followed by 2800018 A DL process has crashed, 2800051 Failure of IpInitTerm during boot of the application, 2800052 Failure of IpServer during boot of the application.
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.