Innova System boot failure Any defect that prevents from getting the first acquisition after the system reset.

Symptom

Error message

1200107 (Frontal) 1300101 (Lateral) ERR_Conditioner_Boot_Failure 1200107 (Frontal) 1300101 (Lateral) ERR_Conditioner_Boot_Failure. 1200107 (1300101): Root Cause: Component(s) - Frontal (Lateral) Conditioner This error is due to time out on Communication to the frontal (lateral) Detector Conditioner or bad status returned by Conditioner. 1200107 (Frontal) - 1300101 (Lateral) ERR_Conditioner_Boot_Failure 1200107 (1300101) : Root Cause: Component(s) - Frontal (Lateral) Conditioner This error is due to time out on Communication to the frontal (lateral) Detector Conditioner or bad status returned by Conditioner.

1200101 Link between IDC and the conditioner is down. 1200101 ERR_CONDITIONER_COM DO XRImDet DEM Component(s)_RTAC_Conditioner_serial_link 1 0 [DemSupervisor::_handleConditionerCommunication] Link between IDC and the conditioner is down DemSupervisor.cpp 1063

1200112 ERR_CONDITIONER_BOOT_WARNING . Conditioner boot warning. sn4764 DIPB oscillator preventive check 1200112 ERR_CONDITIONER_BOOT_WARNING . Conditioner boot warning 1200112 ERR_CONDITIONER_BOOT_WARNING . Conditioner boot warning. See sn4764 DIPB oscillator preventive check

Applies to

Models

Innova

Product

Innova 2000 Innova 2000 systems Innova 2000 systems Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100

Component

Detector conditioner 5131740 SMC detector conditioner Detector conditioner Current rev is -15 but a -7 through -15 is acceptable. Detector Conditioner, connecter kit 2379172 5131740 SMC detector conditioner Detector conditioner Current rev is -15 but a -7 through -15 is acceptable. Detector Conditioner, connecter kit 2379172

Area

X-ray Vascular

Related GE Healthcare X-ray Vascular issues

• The Worklist does not refresh on the system when performing a query.
• INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
• Firewall is broadcasting DHCP addresses
• Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
• No gantry motion is reported by the customer.
• DL system hangs while customer trying to change protocols