GE Healthcare · MR22488142248815
Auto and Manual Prescan Fails
Auto Prescan Fails.
Symptom
Auto and Manual Prescan Fails
Error message
2248814 Power Monitor 1 Fault. RF Transmit power has reached safety limit allowed for scan parameters and patient weight. Check patient weight entered. This could also occur when power cycling SSM. 2248815 Power Monitor 2 Fault. RF Transmit power has reached safety limit allowed for scan parameters and patient weight. Check patient weight entered. This could also occur when power cycling SSM.
Applies to
- Product
- Open Speed with EXCITE For HFO4 and HFO5 only
- Software
- OPENMR4-HFO4 Software version for HFO4 system, which is OpenSpeed with Excite Technology
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA ID135438.Unable to scan with power monitor faults due to the two halves of the knee coil not being connected.
- Power monitor fault due to SSM.Unable to scan with Power Monitor Faults.SecondOpinion System Support Module 2160200-43 wqr.Excite.2248814 Power Monitor 1 Fault.11.1
- CWA Auto Prescan Failure Due to metal present in anatomy, bandages, braces, dental work, etc.
- RF calibration not in specification.
- MRSPT aborts with power monitor faults Due to bad A/B LED Harness in Forward Production LPCA asm.
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.