Prepare for SW 2.0.0_C1 upgrade — copy release to CF card, verify current version
Copy the SW 2.0.0_C1 release image onto a CF card and confirm the DryStar 5300 is currently running R1.8X_C1 or R1.9X_C1 — the two preparation checks that must both come out right before starting the upgrade itself.
Applies to
DryStar 5300 — this section's own document footer labels the printer "(Type 5365)" (no "/100" suffix) — source Chapter 7, §2 / §2.1 / §2.2, Field Modifications (DD+DIS350.05E), Edition 1, Revision 9 (2006-01-20), document p.465-466. Other atoms in this corpus, sourced from a different document (DD+DIS346.05E), label the same printer "Type 5365/100" — both refer to the DryStar 5300 dry film imager; not reconciled here.
Personnel
1 technician · Basic — copying a .zip file to a CF card at a PC, and reading one menu screen at the printer's local key-operator menu. No PC, browser or disassembly beyond the CF-card copy step is involved. Source assigns no formal skill-level label to this section (derived).
Steps
4 steps
Source
DD+DIS350.05E — Drystar 5300, Field Modifications, Chapter 7, §2 "Preparation" / §2.1 "Copying Software Release 2.0.0_C1 to CF Card" and §2.2 "Check of currently installed Software Release" (chapter-footer "Chapter 7/3" through "Chapter 7/4"), Edition 1, Revision 9 (2006-01-20), document p.465-466.
Full step-by-step for Prepare for SW 2.0.0_C1 upgrade — copy release to CF card, verify current version
All 4 steps are documented in the FSELIB DryStar 5300 service manual — re-authored, web-first, with the real figures from the source.
Source: DD+DIS350.05E — Drystar 5300, Field Modifications, Chapter 7, §2 "Preparation" / §2.1 "Copying Software Release 2.0.0_C1 to CF Card" and §2.2 "Check of currently installed Software Release" (chapter-footer "Chapter 7/3" through "Chapter 7/4"), Edition 1, Revision 9 (2006-01-20), document p.465-466.. Preview re-authored by FSELIB — the full procedure with figures and steps is in the paid service manual.